Skip to contentBlack Friday20% off Lite and Core, 35% off Pro · until 30 NovemberSee prices
CAGE MOLD

Manual

Step by step from buying and installing to printing the parts, for every mold type and every tool.

Contents

  1. 01OverviewWhat Cage Mold does, how the workflow runs, which mold types and packages exist, when it goes online and what you end up with.
  2. 02Buying, installing and signing inYou buy the package on the website, or first try the Pro package free for 7 days. There are two ways to install Cage Mold: on Windows you download and open the Cage Mold program, Blender included, or you add the extension to your own Blender with Blender's extension system. Either way you sign in once; the mold engine downloads by itself, and new versions come as updates. This chapter walks through every step with every window you will see.
  3. 03Interface tourWith Cage Mold's tab open there are five pieces on screen: the sidebar, the tool strip, the tool cards, the action card and the split guides in the view. All of them are drawn over Blender's own view and change none of its settings.
  4. 04Quick start: your first moldGenerate and export the mold of one model with the default settings, as a Fitted Box. What every step does is explained in detail in the following chapters; this is only the route.
  5. 05Preparing the masterA good mold starts with a good model: a closed surface at the right scale, standing level on the floor. The tools in the strip handle these with one click each.
  6. 06The tool cardsThe five cards at the right of the view copy the model, hollow it, turn it into a planter, stamp a watermark and fill the places silicone must not enter. Grid, Hollow, Make Planter and Pocket Fill work while the model is prepared (the READY stage); Watermark only once there is a surface for it, after Make Draft or once the mold is finished. Grid and Hollow are in the Core package, the other three in Pro; the badge in the card's corner says so.
  7. 07Mold typesSeven types, each in its own section: which models it is for, what every setting in the sidebar means, the parts it generates and how the printed mold is used. The Fitted Box is described in the most detail; the silicone types share its settings and add only their differences. Slip Cast, a plaster mold, and Injection Mold, a rigid mold for plastic injection, have settings and sections of their own.
  8. 08Numbers and labelsCage Mold works out how much silicone and how much casting material you need, and writes it on the action card and on the printed parts. These figures are in the Core and Pro packages; on Lite these figures read CORE and no label is engraved on the parts.
  9. 09Export and printingOnce the mold is finished, Export writes every printable part to a file. This chapter covers the files, the print orientations and the tolerances.
  10. 10Help and supportWith a question, or something that does not work, you can write without leaving Cage Mold. Cage Mold's version, your settings and the error's text go along by themselves; the answer comes to Cage Mold and to your e-mail.
  11. 11Cage modeA view that hides Blender's menus, workspaces and other editors and works with Cage Mold alone: one 3D view, Cage Mold's tab on the left, its own top bar, a dark theme. Meant for users who do not know Blender, and entirely optional.
  12. 12Troubleshooting and FAQCage Mold's messages appear in the status bar (at the bottom) and on the action card. Below, what each one means and what to do.
  13. 13Before the PourOpen Before the Pour in the tool-card column on the right. It is included in every package. Choose how the model was printed and what you will cast; the checklist shows only the relevant steps. Hover over a step for the reason, or click it to read the explanation.